引用第22楼skyhuihui于2008-02-16 20:20发表的:
产品目录确实强调说能用CP的...MD...不是忽悠吧..
问一下空军就可以了...他肯定知道!
In the spirit of Zero Constraints, the engineers decided that conventional bottom bracket design had no place on the new Madone.
That is where the Trek’s new Precision Fit Sockets come in; the bottom bracket bearings sit directly into the “sockets” in the frame which are essentially integrated sealed bearing races built into the frame.
The current standard outboard bottom bracket bearings are scrapped and the extra width is absorbed into the frame design itself.
There is no need for Loctite or any other retaining method.
The carbon technology is so sophisticated that testing indicates that the bearings will wear out with no adverse effects to the Precision Fit Sockets.
The resulting new structure is 90mm wide with no impact on Q factor.
The new format is compatible with two piece cranks from FSA, Bontrager, Shimano, SRAM and Campagnolo.
引用第23楼起点客服于2008-02-16 20:23发表的:
百分之一百可以用CP的;
SRAM的也可以用;
公路基本就用这些牌子了吧
引用第26楼skyhuihui于2008-02-16 20:24发表的:
In the spirit of Zero Constraints, the engineers decided that conventional bottom bracket design had no place on the new Madone.
That is where the Trek’s new Precision Fit Sockets come in; the bottom bracket bearings sit directly into the “sockets” in the frame which are essentially integrated sealed bearing races built into the frame.
The current standard outboard bottom bracket bearings are scrapped and the extra width is absorbed into the frame design itself.
There is no need for Loctite or any other retaining method.
The carbon technology is so sophisticated that testing indicates that the bearings will wear out with no adverse effects to the Precision Fit Sockets.
.......
想请问 如果能装 又是怎么装呢？ 直接把架子的轴承和防水罩下下来 安CP自己的系统？
其他牌子的 我知道兼容是没有问题的 就这个不太明白~
引用第26楼skyhuihui于2008-02-16 20:24发表的:
In the spirit of Zero Constraints, the engineers decided that conventional bottom bracket design had no place on the new Madone.
That is where the Trek’s new Precision Fit Sockets come in; the bottom bracket bearings sit directly into the “sockets” in the frame which are essentially integrated sealed bearing races built into the frame.
The current standard outboard bottom bracket bearings are scrapped and the extra width is absorbed into the frame design itself.
There is no need for Loctite or any other retaining method.
The carbon technology is so sophisticated that testing indicates that the bearings will wear out with no adverse effects to the Precision Fit Sockets.
.......
two piece crank艾
是分体式还是一体式？
引用第23楼起点客服于2008-02-16 20:23发表的:
百分之一百可以用CP的;
SRAM的也可以用;
公路基本就用这些牌子了吧
起点客服应该是小武?
起点客服是代表起点的，是为起点的客户尽力服务的，欢迎大家的监督
等会找几张中轴的安装图来
引用第31楼起点客服于2008-02-16 20:50发表的:
起点客服是代表起点的，是为起点的客户尽力服务的，欢迎大家的监督
等会找几张中轴的安装图来
好! 好榜样...学习!
好东西
引用第30楼野蛮小子于2008-02-16 20:46发表的:
起点客服应该是小武?
依我每天路过起点的经验来看 90%是小黑